This is the latest recevied telemetry packets stored in our database for station/object DB0HWR-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758193751 | 965.7 hPa | 22.2 C deg | 48.3 % | 1024.8 hPa | 0 C deg |
| 1758191956 | 965.5 hPa | 22.2 C deg | 48.2 % | 1024.7 hPa | 0 C deg |
| 1758184769 | 965.2 hPa | 22.8 C deg | 47.2 % | 1024.2 hPa | 0 C deg |
| 1758182961 | 965.1 hPa | 22.4 C deg | 47.8 % | 1024.2 hPa | 0 C deg |
| 1758181161 | 964.8 hPa | 23.1 C deg | 46.7 % | 1023.7 hPa | 0 C deg |
| 1758179361 | 964.6 hPa | 22.7 C deg | 47.3 % | 1023.6 hPa | 0 C deg |
| 1758175756 | 964.3 hPa | 23.2 C deg | 46.8 % | 1023.1 hPa | 0 C deg |
| 1758172148 | 963.7 hPa | 23.1 C deg | 46.8 % | 1022.5 hPa | 0 C deg |
| 1758170420 | 963.5 hPa | 23.8 C deg | 45.6 % | 1022.2 hPa | 0 C deg |
| 1758161399 | 964 hPa | 23.7 C deg | 45.9 % | 1022.7 hPa | 0 C deg |
| 1758159630 | 963.9 hPa | 23.7 C deg | 46.1 % | 1022.6 hPa | 0 C deg |
| 1758137954 | 964 hPa | 22.3 C deg | 48.2 % | 1023 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)