This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790640011 | 61 Count | 121 Count | 57 Count | 4.11 VDC | 0 VDC |
| 1790638210 | 48 Count | 96 Count | 45 Count | 4.11 VDC | 0 VDC |
| 1790636409 | 36 Count | 74 Count | 34 Count | 4.11 VDC | 0 VDC |
| 1790634608 | 23 Count | 50 Count | 22 Count | 4.11 VDC | 0 VDC |
| 1790632808 | 13 Count | 29 Count | 13 Count | 4.11 VDC | 0 VDC |
| 1790631007 | 474 Count | 1019 Count | 428 Count | 4.11 VDC | 0 VDC |
| 1790629207 | 464 Count | 998 Count | 419 Count | 4.11 VDC | 0 VDC |
| 1790627406 | 454 Count | 976 Count | 410 Count | 4.11 VDC | 0 VDC |
| 1790625605 | 443 Count | 951 Count | 400 Count | 4.11 VDC | 0 VDC |
| 1790623804 | 431 Count | 924 Count | 389 Count | 4.11 VDC | 0 VDC |
| 1790622004 | 418 Count | 898 Count | 377 Count | 4.11 VDC | 0 VDC |
| 1790620203 | 409 Count | 877 Count | 369 Count | 4.11 VDC | 0 VDC |
| 1790618402 | 398 Count | 854 Count | 359 Count | 4.11 VDC | 0 VDC |
| 1790616602 | 386 Count | 833 Count | 348 Count | 4.11 VDC | 0 VDC |
| 1790614801 | 378 Count | 818 Count | 341 Count | 4.11 VDC | 0 VDC |
| 1790613001 | 367 Count | 794 Count | 331 Count | 4.11 VDC | 0 VDC |
| 1790611200 | 357 Count | 774 Count | 322 Count | 4.11 VDC | 0 VDC |
| 1790609400 | 346 Count | 751 Count | 312 Count | 4.11 VDC | 0 VDC |
| 1790605798 | 330 Count | 716 Count | 298 Count | 4.11 VDC | 0 VDC |
| 1790602197 | 313 Count | 674 Count | 283 Count | 4.11 VDC | 0 VDC |
| 1790598594 | 300 Count | 642 Count | 272 Count | 4.11 VDC | 0 VDC |
| 1790596793 | 291 Count | 623 Count | 264 Count | 4.12 VDC | 0 VDC |
| 1790594992 | 279 Count | 597 Count | 253 Count | 4.11 VDC | 0 VDC |
| 1790593192 | 269 Count | 576 Count | 244 Count | 4.12 VDC | 0 VDC |
| 1790591391 | 261 Count | 560 Count | 237 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)