This is the latest recevied telemetry packets stored in our database for station/object SQ5WZK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758212620 | 308 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758211719 | 307 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758211675 | 306 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758211382 | 305 Count | 8 Count | 5 Count | 4.17 VDC | 0 VDC |
| 1758210481 | 304 Count | 8 Count | 5 Count | 4.15 VDC | 0 VDC |
| 1758208911 | 302 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758208011 | 301 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758207110 | 300 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758206209 | 299 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758205308 | 298 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758204407 | 297 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758203507 | 296 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758202606 | 295 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758201705 | 294 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758200804 | 293 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758199903 | 292 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758199003 | 291 Count | 8 Count | 5 Count | 4.15 VDC | 0 VDC |
| 1758198102 | 290 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758197201 | 289 Count | 8 Count | 5 Count | 4.16 VDC | 0 VDC |
| 1758196300 | 288 Count | 8 Count | 5 Count | 4.15 VDC | 0 VDC |
| 1758195400 | 286 Count | 7 Count | 4 Count | 4.16 VDC | 0 VDC |
| 1758194499 | 285 Count | 7 Count | 4 Count | 4.15 VDC | 0 VDC |
| 1758193598 | 284 Count | 7 Count | 4 Count | 4.16 VDC | 0 VDC |
| 1758192697 | 283 Count | 7 Count | 4 Count | 4.15 VDC | 0 VDC |
| 1758191797 | 282 Count | 7 Count | 4 Count | 4.16 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)