This is the latest recevied telemetry packets stored in our database for station/object LU1DNQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1782547042 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 12.47 V |
| 1782546720 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.47 V |
| 1782546398 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 12.45 V |
| 1782546076 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.47 V |
| 1782545754 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.47 V |
| 1782545432 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.45 V |
| 1782545110 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 12.45 V |
| 1782544788 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 12.47 V |
| 1782544466 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 12.45 V |
| 1782544144 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 12.45 V |
| 1782543822 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.45 V |
| 1782543500 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 12.45 V |
| 1782543178 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.45 V |
| 1782542856 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 12.45 V |
| 1782542534 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.45 V |
| 1782542212 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 12.47 V |
| 1782541890 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 12.45 V |
| 1782541568 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.47 V |
| 1782541246 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 12.47 V |
| 1782540924 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.47 V |
| 1782540602 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.45 V |
| 1782540280 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 12.45 V |
| 1782539958 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 12.47 V |
| 1782539636 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 12.45 V |
| 1782539314 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 12.45 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)