APRS Track Direct

My position About ☰

reset

E22FEY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22FEY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274125	3 Pkt	0 Pkt	0 Pkt	-80 dBm	14.13 V
1836273950	0 Pkt	0 Pkt	0 Pkt	-77 dBm	14.13 V
1762273924	5 Pkt	1 Pkt	0 Pkt	-72 dBm	14.17 V
1762272998	2 Pkt	2 Pkt	1 Pkt	-67 dBm	14.15 V
1762272073	1 Pkt	0 Pkt	0 Pkt	-66 dBm	14.15 V
1762271149	1 Pkt	0 Pkt	0 Pkt	-66 dBm	14.15 V
1762270224	2 Pkt	0 Pkt	0 Pkt	-72 dBm	14.17 V
1762269299	6 Pkt	0 Pkt	0 Pkt	-75 dBm	14.15 V
1762268374	2 Pkt	0 Pkt	0 Pkt	-69 dBm	14.17 V
1762267449	2 Pkt	0 Pkt	0 Pkt	-73 dBm	14.13 V
1762266524	3 Pkt	0 Pkt	0 Pkt	-70 dBm	14.17 V
1762265600	2 Pkt	0 Pkt	0 Pkt	-69 dBm	14.15 V
1762264675	4 Pkt	0 Pkt	0 Pkt	-72 dBm	14.15 V
1762263751	2 Pkt	0 Pkt	0 Pkt	-72 dBm	14.15 V
1762262827	2 Pkt	1 Pkt	0 Pkt	-73 dBm	14.15 V
1762261902	3 Pkt	0 Pkt	0 Pkt	-74 dBm	14.15 V
1762260978	2 Pkt	1 Pkt	0 Pkt	-77 dBm	14.15 V
1762260052	5 Pkt	0 Pkt	0 Pkt	-74 dBm	14.17 V
1762259127	1 Pkt	0 Pkt	0 Pkt	-72 dBm	14.15 V
1762258203	3 Pkt	0 Pkt	0 Pkt	-78 dBm	14.13 V
1762257278	3 Pkt	1 Pkt	1 Pkt	-74 dBm	14.15 V
1762256354	3 Pkt	0 Pkt	0 Pkt	-73 dBm	14.17 V
1762255429	5 Pkt	0 Pkt	0 Pkt	-73 dBm	14.17 V
1762254504	1 Pkt	0 Pkt	0 Pkt	-72 dBm	14.15 V
1762253580	3 Pkt	0 Pkt	0 Pkt	-73 dBm	14.13 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)