This is the latest recevied telemetry packets stored in our database for station/object YD2UMH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1758268729 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 100 % |
| 1758268407 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 100 % |
| 1758268085 | 0 Pkt | 1 Pkt | 0 Pkt | -81 dBm | 100 % |
| 1758267763 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 100 % |
| 1758267441 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 100 % |
| 1758267119 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 100 % |
| 1758266797 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 100 % |
| 1758266475 | 0 Pkt | 1 Pkt | 0 Pkt | -78 dBm | 100 % |
| 1758266152 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 100 % |
| 1758265830 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 100 % |
| 1758265508 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 100 % |
| 1758265186 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 100 % |
| 1758264864 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 100 % |
| 1758264542 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 100 % |
| 1758264220 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 100 % |
| 1758263898 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 100 % |
| 1758263576 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 100 % |
| 1758263254 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 100 % |
| 1758262932 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 100 % |
| 1758262610 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 100 % |
| 1758262288 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 100 % |
| 1758261968 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 100 % |
| 1758261644 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 100 % |
| 1758261322 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 100 % |
| 1758261000 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 100 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)