APRS Track Direct

My position About ☰

reset

E22UMT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22UMT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732294186	6 Pkt	0 Pkt	-70 dBm	12.26 V
1732292360	5 Pkt	0 Pkt	-69 dBm	12.26 V
1732290533	5 Pkt	0 Pkt	-69 dBm	12.26 V
1732288708	5 Pkt	0 Pkt	-69 dBm	12.26 V
1732286882	5 Pkt	0 Pkt	-71 dBm	12.45 V
1732285054	4 Pkt	1 Pkt	-69 dBm	12.26 V
1732283229	6 Pkt	0 Pkt	-72 dBm	12.26 V
1732281402	5 Pkt	0 Pkt	-72 dBm	12.26 V
1732279576	6 Pkt	0 Pkt	-71 dBm	12.26 V
1732277749	23 Pkt	0 Pkt	-70 dBm	12.26 V
1732275922	10 Pkt	0 Pkt	-70 dBm	12.26 V
1732274095	8 Pkt	0 Pkt	-70 dBm	12.26 V
1732272269	10 Pkt	1 Pkt	-69 dBm	12.26 V
1732270441	10 Pkt	0 Pkt	-69 dBm	12.26 V
1732268614	4 Pkt	1 Pkt	-69 dBm	12.26 V
1732266788	6 Pkt	3 Pkt	-69 dBm	12.26 V
1732264962	4 Pkt	1 Pkt	-69 dBm	12.26 V
1732263136	7 Pkt	0 Pkt	-69 dBm	12.26 V
1732261311	6 Pkt	2 Pkt	-69 dBm	12.26 V
1732259484	3 Pkt	0 Pkt	-69 dBm	12.26 V
1732257658	2 Pkt	1 Pkt	-69 dBm	12.45 V
1732255831	5 Pkt	3 Pkt	-69 dBm	12.26 V
1732254005	4 Pkt	1 Pkt	-69 dBm	12.26 V
1732252178	4 Pkt	0 Pkt	-70 dBm	12.26 V
1732250352	3 Pkt	0 Pkt	-69 dBm	12.26 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)