This is the latest recevied telemetry packets stored in our database for station/object DG0JN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Ubat* | TxPwr* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758195691 | 21.7 degC | 3.75 V | 15 dBm | 0 | 0 |
| 1758195389 | 21.5 degC | 3.77 V | 16 dBm | 0 | 0 |
| 1758195087 | 21.5 degC | 3.77 V | 9 dBm | 0 | 0 |
| 1758194785 | 21.5 degC | 3.75 V | 16 dBm | 0 | 0 |
| 1758194479 | 21.5 degC | 3.77 V | 10 dBm | 0 | 0 |
| 1758194176 | 21.5 degC | 3.76 V | 16 dBm | 0 | 0 |
| 1758193874 | 21.2 degC | 3.78 V | 11 dBm | 0 | 0 |
| 1758193572 | 21.2 degC | 3.77 V | 16 dBm | 0 | 0 |
| 1758193270 | 21.2 degC | 3.78 V | 12 dBm | 0 | 0 |
| 1758192968 | 21.2 degC | 3.77 V | 16 dBm | 0 | 0 |
| 1758192666 | 21.2 degC | 3.78 V | 13 dBm | 0 | 0 |
| 1758192364 | 21 degC | 3.77 V | 16 dBm | 0 | 0 |
| 1758192061 | 20.7 degC | 3.77 V | 14 dBm | 0 | 0 |
| 1758191758 | 20.7 degC | 3.76 V | 16 dBm | 0 | 0 |
| 1758191456 | 20.7 degC | 3.77 V | 15 dBm | 0 | 0 |
| 1758191154 | 20.5 degC | 3.77 V | 16 dBm | 0 | 0 |
| 1758190852 | 20.2 degC | 3.78 V | 9 dBm | 0 | 0 |
| 1758190550 | 20 degC | 3.78 V | 16 dBm | 0 | 0 |
| 1758190248 | 20 degC | 3.77 V | 10 dBm | 0 | 0 |
| 1758189946 | 19.5 degC | 3.77 V | 16 dBm | 0 | 0 |
| 1758189643 | 19.2 degC | 3.78 V | 11 dBm | 0 | 0 |
| 1758189341 | 18.7 degC | 3.78 V | 16 dBm | 0 | 0 |
| 1758189039 | 18.5 degC | 3.77 V | 12 dBm | 0 | 0 |
| 1758188737 | 18.2 degC | 3.79 V | 16 dBm | 0 | 0 |
| 1758188435 | 17.7 degC | 3.77 V | 13 dBm | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, -273
Ubat: 0, 0.001, 0
TxPwr: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)