APRS Track Direct

My position About ☰

reset

VE7SML-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7SML-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	Solar *	temp*
1732224483	13.08 volts	0.02 amps	-0.5 deg C
1732224482	13.08 volts	0.02 amps	-0.5 deg C
1732224182	13.08 volts	0.02 amps	-0.5 deg C
1732223882	13.08 volts	0.02 amps	-0.5 deg C
1732223582	13.08 volts	0.02 amps	-0.5 deg C
1732223283	13.08 volts	0.02 amps	-0.5 deg C
1732223282	13.08 volts	0.02 amps	-0.5 deg C
1732222982	13.08 volts	0.02 amps	-0.5 deg C
1732222683	13.08 volts	0.02 amps	-0.5 deg C
1732222682	13.08 volts	0.02 amps	-0.5 deg C
1732222382	13.15 volts	0.02 amps	-0.5 deg C
1732222082	13.08 volts	0.02 amps	-0.5 deg C
1732221782	13.15 volts	0.02 amps	-0.5 deg C
1732221485	13.08 volts	0.02 amps	-0.5 deg C
1732221482	13.08 volts	0.02 amps	-0.5 deg C
1732221182	13.08 volts	0.02 amps	-0.5 deg C
1732220883	13.08 volts	0.02 amps	-0.5 deg C
1732220882	13.08 volts	0.02 amps	-0.5 deg C
1732220582	13.15 volts	0.02 amps	-0.5 deg C
1732220283	13.08 volts	0.02 amps	-0.5 deg C
1732220282	13.08 volts	0.02 amps	-0.5 deg C
1732219982	13.08 volts	0.02 amps	-0.5 deg C
1732219683	13.15 volts	0.02 amps	-0.5 deg C
1732219682	13.15 volts	0.02 amps	-0.5 deg C
1732219382	13.15 volts	0.02 amps	-0.5 deg C

*Used Equation Coefficients:

Voltage: 0, 0.075, 3.55

Solar : 0, 0.195, -24.94

temp: 0, 0.5, -64

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)