This is the latest recevied telemetry packets stored in our database for station/object SN0PEK-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Vsolar* | SunElev* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762263529 | -0.02 degC | 0 Volts | 16.19 deg | 0 | 0 |
| 1762262730 | -0.02 degC | 0 Volts | 18.23 deg | 0 | 0 |
| 1762262422 | -0.02 degC | 0 Volts | 19.01 deg | 0 | 0 |
| 1762261879 | -0.02 degC | 0 Volts | 20.33 deg | 0 | 0 |
| 1762261342 | -0.02 degC | 0 Volts | 21.61 deg | 0 | 0 |
| 1762260808 | -0.02 degC | 0 Volts | 22.84 deg | 0 | 0 |
| 1762259448 | -0.02 degC | 0 Volts | 25.79 deg | 0 | 0 |
| 1762258023 | -0.02 degC | 0 Volts | 28.52 deg | 0 | 0 |
| 1762257742 | -0.02 degC | 0 Volts | 29.02 deg | 0 | 0 |
| 1762257468 | -0.02 degC | 0 Volts | 29.49 deg | 0 | 0 |
| 1762257197 | -0.02 degC | 0 Volts | 29.96 deg | 0 | 0 |
| 1762256628 | -0.02 degC | 0 Volts | 30.84 deg | 0 | 0 |
| 1762256101 | -0.02 degC | 0 Volts | 31.62 deg | 0 | 0 |
| 1762255829 | -0.02 degC | 0 Volts | 32 deg | 0 | 0 |
| 1762255012 | -0.02 degC | 0 Volts | 33.03 deg | 0 | 0 |
| 1762254754 | -0.02 degC | 0 Volts | 33.35 deg | 0 | 0 |
| 1762254489 | -0.02 degC | 0 Volts | 33.63 deg | 0 | 0 |
| 1762253935 | -0.02 degC | 0 Volts | 34.16 deg | 0 | 0 |
| 1762253671 | -0.02 degC | 0 Volts | 34.38 deg | 0 | 0 |
| 1762252852 | -0.02 degC | 0 Volts | 35.01 deg | 0 | 0 |
| 1762252562 | -0.02 degC | 0 Volts | 35.17 deg | 0 | 0 |
| 1762252305 | -0.02 degC | 0 Volts | 35.29 deg | 0 | 0 |
| 1762252049 | -0.02 degC | 0 Volts | 35.42 deg | 0 | 0 |
| 1762251789 | -0.02 degC | 0 Volts | 35.51 deg | 0 | 0 |
| 1762251240 | -0.02 degC | 0 Volts | 35.67 deg | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.43, -80
Vsolar: 0, 0.1, 0
SunElev: 0, 0.3137, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)