This is the latest recevied telemetry packets stored in our database for station/object DB0EIR-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758190234 | 21.9 deg C | 52.9 % | 0 | 0 | 0 |
| 1758189334 | 21.8 deg C | 53 % | 0 | 0 | 0 |
| 1758188434 | 21.8 deg C | 53.1 % | 0 | 0 | 0 |
| 1758187534 | 21.8 deg C | 53.2 % | 0 | 0 | 0 |
| 1758186634 | 21.8 deg C | 53.3 % | 0 | 0 | 0 |
| 1758186301 | 21.7 deg C | 53.3 % | 0 | 0 | 0 |
| 1758185401 | 21.7 deg C | 53.4 % | 0 | 0 | 0 |
| 1758184501 | 21.7 deg C | 53.5 % | 0 | 0 | 0 |
| 1758183601 | 21.7 deg C | 53.6 % | 0 | 0 | 0 |
| 1758182700 | 21.7 deg C | 53.7 % | 0 | 0 | 0 |
| 1758181800 | 21.7 deg C | 53.8 % | 0 | 0 | 0 |
| 1758180900 | 21.7 deg C | 54 % | 0 | 0 | 0 |
| 1758180000 | 21.6 deg C | 54.2 % | 0 | 0 | 0 |
| 1758179100 | 21.6 deg C | 54.3 % | 0 | 0 | 0 |
| 1758178200 | 21.6 deg C | 54.2 % | 0 | 0 | 0 |
| 1758177300 | 21.6 deg C | 54.2 % | 0 | 0 | 0 |
| 1758176400 | 21.6 deg C | 54.2 % | 0 | 0 | 0 |
| 1758175500 | 21.6 deg C | 54.3 % | 0 | 0 | 0 |
| 1758174600 | 21.6 deg C | 54.3 % | 0 | 0 | 0 |
| 1758174268 | 21.6 deg C | 54.3 % | 0 | 0 | 0 |
| 1758173368 | 21.6 deg C | 54.3 % | 0 | 0 | 0 |
| 1758172468 | 21.6 deg C | 54.2 % | 0 | 0 | 0 |
| 1758171568 | 21.6 deg C | 54.1 % | 0 | 0 | 0 |
| 1758170668 | 21.6 deg C | 54.1 % | 0 | 0 | 0 |
| 1758169767 | 21.6 deg C | 54.1 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)