This is the latest recevied telemetry packets stored in our database for station/object HS5AL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1836274702 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 1 % |
| 1836274574 | 0 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 2 % |
| 1836274080 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 2 % |
| 1774172942 | 0 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 4 % |
| 1774172320 | 0 Pkt | 1 Pkt | 0 Pkt | -47 dBm | 4 % |
| 1774171698 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 4 % |
| 1774171076 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 4 % |
| 1774170454 | 0 Pkt | 1 Pkt | 0 Pkt | -46 dBm | 3 % |
| 1774169832 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 3 % |
| 1774169210 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 3 % |
| 1774168588 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 3 % |
| 1774167966 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 3 % |
| 1774167344 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 3 % |
| 1774166722 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 3 % |
| 1774166100 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 3 % |
| 1774165478 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 3 % |
| 1774164856 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 3 % |
| 1774164234 | 0 Pkt | 1 Pkt | 0 Pkt | -45 dBm | 3 % |
| 1774163612 | 0 Pkt | 1 Pkt | 0 Pkt | -45 dBm | 2 % |
| 1774162990 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 2 % |
| 1774162368 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 2 % |
| 1774161746 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 2 % |
| 1774161124 | 0 Pkt | 1 Pkt | 0 Pkt | -40 dBm | 2 % |
| 1774160502 | 0 Pkt | 1 Pkt | 0 Pkt | -43 dBm | 2 % |
| 1774159880 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 2 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)