APRS Track Direct

My position About ☰

reset

HS5AU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5AU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	Temp*	VIN*
1758163806	0 Pkt	4 Pkt	44.2 C	13.94 V
1758163212	2 Pkt	0 Pkt	43.3 C	14.06 V
1758162617	0 Pkt	1 Pkt	43.3 C	13.76 V
1758162023	0 Pkt	0 Pkt	43.3 C	13.41 V
1758161429	1 Pkt	0 Pkt	42.5 C	13.25 V
1758160834	2 Pkt	1 Pkt	42.5 C	13.27 V
1758160240	0 Pkt	4 Pkt	42.5 C	13.39 V
1758159646	1 Pkt	1 Pkt	41.7 C	13.36 V
1758159050	0 Pkt	1 Pkt	40.8 C	12.9 V
1758158456	1 Pkt	0 Pkt	40 C	13.13 V
1758157861	0 Pkt	0 Pkt	40 C	13.27 V
1758157267	2 Pkt	3 Pkt	40 C	12.19 V
1758156672	2 Pkt	5 Pkt	39.2 C	11.8 V
1758156077	3 Pkt	3 Pkt	39.2 C	11.87 V
1758155481	1 Pkt	2 Pkt	39.2 C	12.1 V
1758154887	3 Pkt	3 Pkt	38.3 C	11.73 V
1758154290	0 Pkt	0 Pkt	37.5 C	11.71 V
1758153696	2 Pkt	3 Pkt	38.3 C	11.68 V
1758153102	0 Pkt	4 Pkt	38.3 C	11.68 V
1758152507	3 Pkt	0 Pkt	37.5 C	12.1 V
1758151913	0 Pkt	1 Pkt	38.3 C	12.03 V
1758151319	4 Pkt	0 Pkt	37.5 C	12.05 V
1758150724	3 Pkt	0 Pkt	38.3 C	12 V
1758150129	3 Pkt	1 Pkt	37.5 C	12 V
1758149534	0 Pkt	1 Pkt	38.3 C	12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

Temp: 0, 1, 0

GPS: 0, 1, 0

VIN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)