This is the latest recevied telemetry packets stored in our database for station/object E27AFE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1836274453 | 0 Pkt | 0 Pkt | 0 Pkt | -72 dBm | 50 % |
| 1836274325 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 43 % |
| 1782559198 | 0 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 9 % |
| 1782558576 | 0 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 17 % |
| 1782557954 | 1 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 24 % |
| 1782557332 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 30 % |
| 1782556710 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 25 % |
| 1782556088 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 28 % |
| 1782555466 | 1 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 26 % |
| 1782554844 | 2 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 36 % |
| 1782554222 | 0 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 37 % |
| 1782553600 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 41 % |
| 1782552978 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 37 % |
| 1782552355 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 44 % |
| 1782551734 | 1 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 47 % |
| 1782551111 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 56 % |
| 1782550489 | 0 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 62 % |
| 1782549868 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 62 % |
| 1782549245 | 0 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 62 % |
| 1782548623 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 55 % |
| 1782548001 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 61 % |
| 1782547379 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 59 % |
| 1782546757 | 0 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 61 % |
| 1782546135 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 60 % |
| 1782545513 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 55 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)