APRS Track Direct

My position About ☰

reset

KC5HWB-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC5HWB-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*	InetiGate*
1786739953	274 Pkts	272 Pkts	74 Pkts	34 C	0 Pkts
1786736352	309 Pkts	307 Pkts	65 Pkts	34 C	0 Pkts
1786732752	251 Pkts	249 Pkts	110 Pkts	32 C	0 Pkts
1786729152	83 Pkts	82 Pkts	39 Pkts	29 C	1 Pkts
1786725552	93 Pkts	91 Pkts	37 Pkts	26 C	0 Pkts
1786721953	169 Pkts	166 Pkts	64 Pkts	27 C	0 Pkts
1786718353	258 Pkts	256 Pkts	78 Pkts	27 C	0 Pkts
1786714753	221 Pkts	216 Pkts	43 Pkts	27 C	0 Pkts
1786711153	235 Pkts	231 Pkts	54 Pkts	26 C	0 Pkts
1786707553	226 Pkts	221 Pkts	49 Pkts	27 C	0 Pkts
1786703953	175 Pkts	170 Pkts	44 Pkts	27 C	0 Pkts
1786700353	176 Pkts	174 Pkts	46 Pkts	28 C	0 Pkts
1786696753	182 Pkts	180 Pkts	37 Pkts	29 C	0 Pkts
1786693153	151 Pkts	149 Pkts	37 Pkts	29 C	0 Pkts
1786689553	139 Pkts	137 Pkts	43 Pkts	29 C	0 Pkts
1786685953	130 Pkts	128 Pkts	37 Pkts	30 C	0 Pkts
1786682353	133 Pkts	131 Pkts	45 Pkts	31 C	0 Pkts
1786678753	155 Pkts	151 Pkts	39 Pkts	32 C	0 Pkts
1786675153	292 Pkts	290 Pkts	89 Pkts	33 C	0 Pkts
1786671553	167 Pkts	166 Pkts	61 Pkts	34 C	0 Pkts
1786667953	184 Pkts	181 Pkts	47 Pkts	35 C	0 Pkts
1786664353	260 Pkts	258 Pkts	97 Pkts	36 C	0 Pkts
1786660753	40 Pkts	36 Pkts	18 Pkts	32 C	0 Pkts
1786657153	110 Pkts	109 Pkts	78 Pkts	34 C	0 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)