APRS Track Direct

My position About ☰

reset

WC4PEM-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1732362323	28.5 C	14.18 Volt	270 Pkt	1090 Pkt	69 Pcnt
1732362024	29.5 C	14.18 Volt	270 Pkt	1060 Pkt	68 Pcnt
1732362023	29.5 C	14.18 Volt	270 Pkt	1060 Pkt	68 Pcnt
1732361723	28.5 C	13.95 Volt	260 Pkt	1070 Pkt	69 Pcnt
1732361424	28 C	14.18 Volt	260 Pkt	1080 Pkt	70 Pcnt
1732361423	28 C	14.18 Volt	260 Pkt	1080 Pkt	70 Pcnt
1732361123	27 C	14.18 Volt	260 Pkt	1070 Pkt	70 Pcnt
1732360824	28.5 C	14.18 Volt	270 Pkt	1070 Pkt	70 Pcnt
1732360823	28.5 C	14.18 Volt	270 Pkt	1070 Pkt	70 Pcnt
1732360523	29.5 C	14.18 Volt	260 Pkt	1060 Pkt	70 Pcnt
1732360224	28.5 C	14.18 Volt	260 Pkt	1040 Pkt	70 Pcnt
1732360223	28.5 C	14.18 Volt	260 Pkt	1040 Pkt	70 Pcnt
1732359923	28 C	14.18 Volt	260 Pkt	1030 Pkt	71 Pcnt
1732359624	27.5 C	14.18 Volt	260 Pkt	1040 Pkt	71 Pcnt
1732359623	27.5 C	14.18 Volt	260 Pkt	1040 Pkt	71 Pcnt
1732359323	28.5 C	14.18 Volt	250 Pkt	1050 Pkt	72 Pcnt
1732359024	29.5 C	14.18 Volt	250 Pkt	1030 Pkt	72 Pcnt
1732359023	29.5 C	14.18 Volt	250 Pkt	1030 Pkt	72 Pcnt
1732358723	28.5 C	14.18 Volt	260 Pkt	1040 Pkt	72 Pcnt
1732358424	28 C	14.18 Volt	260 Pkt	1040 Pkt	73 Pcnt
1732358423	28 C	14.18 Volt	260 Pkt	1040 Pkt	73 Pcnt
1732358123	27.5 C	14.18 Volt	260 Pkt	1030 Pkt	72 Pcnt
1732357824	28.5 C	14.18 Volt	260 Pkt	1010 Pkt	72 Pcnt
1732357823	28.5 C	14.18 Volt	260 Pkt	1010 Pkt	72 Pcnt
1732357523	29 C	14.18 Volt	250 Pkt	1000 Pkt	72 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)