This is the latest recevied telemetry packets stored in our database for station/object ER-EA4GYI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786724437 | 0 | 0 | 0 | 0 | 0 |
| 1786723837 | 0 | 0 | 0 | 0 | 0 |
| 1786723237 | 0 | 28 | 0 | 2 | 0 |
| 1786722637 | 0 | 38 | 0 | 5 | 0 |
| 1786722037 | 0 | 40 | 0 | 2 | 0 |
| 1786721437 | 0 | 2 | 0 | 1 | 0 |
| 1786720837 | 0 | 33 | 0 | 4 | 0 |
| 1786720237 | 0 | 46 | 0 | 5 | 0 |
| 1786719637 | 0 | 46 | 0 | 5 | 0 |
| 1786719037 | 0 | 4 | 0 | 2 | 0 |
| 1786718437 | 0 | 63 | 0 | 5 | 0 |
| 1786717837 | 0 | 2 | 0 | 1 | 0 |
| 1786717237 | 0 | 15 | 0 | 2 | 0 |
| 1786716637 | 0 | 2 | 0 | 1 | 0 |
| 1786716037 | 0 | 76 | 0 | 7 | 0 |
| 1786715437 | 0 | 23 | 0 | 4 | 0 |
| 1786714837 | 0 | 26 | 0 | 2 | 0 |
| 1786714237 | 0 | 2 | 0 | 1 | 0 |
| 1786713637 | 0 | 34 | 0 | 5 | 0 |
| 1786713037 | 0 | 32 | 0 | 4 | 0 |
| 1786712437 | 0 | 34 | 0 | 2 | 0 |
| 1786711837 | 0 | 2 | 0 | 1 | 0 |
| 1786711237 | 0 | 13 | 0 | 2 | 0 |
| 1786710637 | 0 | 0 | 0 | 0 | 0 |
| 1786710037 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)