APRS Track Direct

My position About ☰

reset

9A3DZK-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A3DZK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1758192623	14.48 Volt	180 Pkt	40 Pkt	95 Pcnt
1758191423	14.4 Volt	160 Pkt	40 Pkt	95 Pcnt
1758190221	14.4 Volt	110 Pkt	30 Pkt	93 Pcnt
1758189020	14.33 Volt	90 Pkt	20 Pkt	92 Pcnt
1758187818	14.25 Volt	130 Pkt	20 Pkt	97 Pcnt
1758186617	14.03 Volt	170 Pkt	30 Pkt	97 Pcnt
1758185417	13.88 Volt	190 Pkt	20 Pkt	99 Pcnt
1758184215	13.73 Volt	200 Pkt	20 Pkt	98 Pcnt
1758183015	13.65 Volt	200 Pkt	30 Pkt	96 Pcnt
1758181813	13.58 Volt	200 Pkt	40 Pkt	96 Pcnt
1758180611	13.5 Volt	210 Pkt	50 Pkt	96 Pcnt
1758179410	13.43 Volt	200 Pkt	50 Pkt	97 Pcnt
1758178209	13.43 Volt	170 Pkt	40 Pkt	97 Pcnt
1758177008	13.35 Volt	140 Pkt	30 Pkt	97 Pcnt
1758175807	13.13 Volt	140 Pkt	30 Pkt	97 Pcnt
1758174606	12.98 Volt	160 Pkt	30 Pkt	98 Pcnt
1758173406	12.9 Volt	160 Pkt	30 Pkt	98 Pcnt
1758172203	12.9 Volt	160 Pkt	20 Pkt	98 Pcnt
1758171002	12.9 Volt	160 Pkt	20 Pkt	97 Pcnt
1758169805	12.9 Volt	150 Pkt	20 Pkt	98 Pcnt
1758168600	12.9 Volt	150 Pkt	30 Pkt	97 Pcnt
1758167399	12.9 Volt	150 Pkt	30 Pkt	98 Pcnt
1758166198	12.9 Volt	150 Pkt	30 Pkt	96 Pcnt
1758164997	12.9 Volt	150 Pkt	30 Pkt	96 Pcnt
1758163795	12.9 Volt	150 Pkt	30 Pkt	95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)