APRS Track Direct

My position About ☰

reset

VA3XLT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3XLT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790661059	14.33 Volt	800 Pkt	20 Pkt	58 Pcnt
1790657458	14.25 Volt	790 Pkt	20 Pkt	59 Pcnt
1790653851	14.33 Volt	620 Pkt	10 Pkt	51 Pcnt
1790650249	14.33 Volt	700 Pkt	20 Pkt	61 Pcnt
1790646645	14.33 Volt	760 Pkt	20 Pkt	67 Pcnt
1790643040	14.33 Volt	560 Pkt	10 Pkt	59 Pcnt
1790639437	14.33 Volt	390 Pkt	10 Pkt	59 Pcnt
1790635833	14.25 Volt	300 Pkt	10 Pkt	61 Pcnt
1790632233	14.33 Volt	340 Pkt	20 Pkt	63 Pcnt
1790628626	14.33 Volt	450 Pkt	20 Pkt	72 Pcnt
1790625024	14.25 Volt	400 Pkt	30 Pkt	65 Pcnt
1790621419	14.33 Volt	370 Pkt	30 Pkt	78 Pcnt
1790617818	14.33 Volt	280 Pkt	30 Pkt	62 Pcnt
1790614214	14.33 Volt	350 Pkt	40 Pkt	60 Pcnt
1790610612	14.33 Volt	310 Pkt	30 Pkt	58 Pcnt
1790607006	14.33 Volt	430 Pkt	10 Pkt	54 Pcnt
1790603402	14.33 Volt	600 Pkt	20 Pkt	55 Pcnt
1790599799	14.33 Volt	640 Pkt	20 Pkt	58 Pcnt
1790596199	14.25 Volt	500 Pkt	20 Pkt	57 Pcnt
1790592594	14.25 Volt	580 Pkt	30 Pkt	64 Pcnt
1790588992	14.33 Volt	490 Pkt	20 Pkt	64 Pcnt
1790585384	14.33 Volt	520 Pkt	20 Pkt	62 Pcnt
1790581782	14.33 Volt	560 Pkt	10 Pkt	56 Pcnt
1790578179	14.33 Volt	560 Pkt	20 Pkt	50 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10M: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)