This is the latest recevied telemetry packets stored in our database for station/object S55YCR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1836274643 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1836274493 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1836274343 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1836274193 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1836274043 | 12.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762301236 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762300936 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762300636 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762300336 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762300036 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762299736 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762299436 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762299136 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762298836 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762298536 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762298236 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762297936 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762297636 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762297336 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762297036 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762296736 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762296436 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762296136 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762295836 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1762295536 | 12.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)