APRS Track Direct

My position About ☰

reset

SV1BYK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV1BYK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1758233046	13.58 Volt	30 Pkt	0 Pkt	89 Pcnt
1758232747	13.58 Volt	20 Pkt	0 Pkt	93 Pcnt
1758232746	13.58 Volt	20 Pkt	0 Pkt	93 Pcnt
1758232446	13.58 Volt	30 Pkt	0 Pkt	93 Pcnt
1758232147	13.58 Volt	30 Pkt	0 Pkt	93 Pcnt
1758232146	13.58 Volt	30 Pkt	0 Pkt	93 Pcnt
1758231846	13.58 Volt	30 Pkt	10 Pkt	94 Pcnt
1758231547	13.58 Volt	30 Pkt	10 Pkt	93 Pcnt
1758231546	13.58 Volt	30 Pkt	10 Pkt	93 Pcnt
1758231246	13.58 Volt	30 Pkt	0 Pkt	93 Pcnt
1758230947	13.58 Volt	30 Pkt	10 Pkt	86 Pcnt
1758230946	13.58 Volt	30 Pkt	10 Pkt	86 Pcnt
1758230646	13.58 Volt	30 Pkt	10 Pkt	85 Pcnt
1758230347	13.58 Volt	30 Pkt	10 Pkt	83 Pcnt
1758230346	13.58 Volt	30 Pkt	10 Pkt	83 Pcnt
1758230046	13.65 Volt	30 Pkt	10 Pkt	86 Pcnt
1758229747	13.58 Volt	40 Pkt	10 Pkt	80 Pcnt
1758229746	13.58 Volt	40 Pkt	10 Pkt	80 Pcnt
1758229446	13.58 Volt	40 Pkt	10 Pkt	79 Pcnt
1758229147	13.65 Volt	50 Pkt	10 Pkt	75 Pcnt
1758229146	13.65 Volt	50 Pkt	10 Pkt	75 Pcnt
1758228846	13.58 Volt	60 Pkt	10 Pkt	76 Pcnt
1758228547	13.65 Volt	70 Pkt	10 Pkt	75 Pcnt
1758228546	13.65 Volt	70 Pkt	10 Pkt	75 Pcnt
1758228246	13.65 Volt	80 Pkt	20 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)