This is the latest recevied telemetry packets stored in our database for station/object YD1OCG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CTemp* | CLoad* | CFreq* | RFree* | DTemp* |
|---|---|---|---|---|---|
| 1794903402 | 34 C | 4 % | 1996 MHz | 18 % | 30 C |
| 1794903153 | 34 C | 3 % | 1796 MHz | 18 % | 29 C |
| 1794902888 | 37 C | 5 % | 2103 MHz | 17 % | 30 C |
| 1794902618 | 34 C | 6 % | 1796 MHz | 18 % | 30 C |
| 1794902332 | 34 C | 4 % | 1996 MHz | 18 % | 29 C |
| 1794902053 | 34 C | 8 % | 1795 MHz | 19 % | 29 C |
| 1794901767 | 34 C | 5 % | 1796 MHz | 19 % | 29 C |
| 1794901473 | 34 C | 5 % | 1996 MHz | 19 % | 30 C |
| 1794901188 | 34 C | 5 % | 1917 MHz | 19 % | 29 C |
| 1794900918 | 35 C | 6 % | 1940 MHz | 19 % | 29 C |
| 1794900673 | 34 C | 46 % | 1596 MHz | 20 % | 29 C |
| 1794900417 | 34 C | 14 % | 1596 MHz | 20 % | 30 C |
*Used Equation Coefficients:
CTemp: 0, 1, 0
CLoad: 0, 1, 0
CFreq: 0, 1, 0
RFree: 0, 1, 0
DTemp: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)