APRS Track Direct

My position About ☰

reset

TA4AIX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA4AIX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1836274612	5 Pkt	-85 dBm	11.14 V
1762290776	2 Pkt	-78 dBm	11.14 V
1762290776	7 Pkt	-79 dBm	11.14 V
1762289341	2 Pkt	-78 dBm	11.14 V
1762286750	1 Pkt	-72 dBm	11.14 V
1762284873	2 Pkt	-80 dBm	11.14 V
1762283956	5 Pkt	-77 dBm	11.14 V
1762283011	3 Pkt	-75 dBm	11.14 V
1762282050	5 Pkt	-75 dBm	11.14 V
1762281158	4 Pkt	-76 dBm	11.14 V
1762279391	3 Pkt	-80 dBm	11.14 V
1762278468	2 Pkt	-80 dBm	11.14 V
1762277565	0 Pkt	-75 dBm	11.12 V
1762277401	2 Pkt	-76 dBm	11.14 V
1762276483	4 Pkt	-76 dBm	11.14 V
1762275608	1 Pkt	-81 dBm	11.14 V
1762274575	5 Pkt	-80 dBm	11.14 V
1762273652	1 Pkt	-78 dBm	11.14 V
1762272770	4 Pkt	-78 dBm	11.14 V
1762271811	0 Pkt	-75 dBm	11.14 V
1762270900	1 Pkt	-77 dBm	11.14 V
1762269114	3 Pkt	-75 dBm	11.14 V
1762268189	1 Pkt	-74 dBm	11.14 V
1762267278	0 Pkt	-77 dBm	11.14 V
1762267141	4 Pkt	-76 dBm	11.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)