APRS Track Direct

My position About ☰

reset

TA1NI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274249	56 Pkt	6 Pkt	16 Pkt	-58 dBm	0.04 V
1836274229	56 Pkt	13 Pkt	7 Pkt	-59 dBm	0.04 V
1778037517	42 Pkt	2 Pkt	0 Pkt	-64 dBm	0.04 V
1778036788	47 Pkt	11 Pkt	0 Pkt	-73 dBm	0.04 V
1778036057	61 Pkt	9 Pkt	0 Pkt	-70 dBm	0.04 V
1778035327	51 Pkt	7 Pkt	0 Pkt	-69 dBm	0.04 V
1778034597	47 Pkt	1 Pkt	0 Pkt	-67 dBm	0.04 V
1778033867	10 Pkt	0 Pkt	0 Pkt	-64 dBm	0.04 V
1778033049	32 Pkt	8 Pkt	0 Pkt	-76 dBm	0.04 V
1778032599	43 Pkt	11 Pkt	0 Pkt	-73 dBm	0.04 V
1778031869	52 Pkt	15 Pkt	0 Pkt	-69 dBm	0.04 V
1778031139	44 Pkt	16 Pkt	0 Pkt	-68 dBm	0.04 V
1778030409	47 Pkt	15 Pkt	0 Pkt	-76 dBm	0.04 V
1778029679	45 Pkt	15 Pkt	0 Pkt	-73 dBm	0.04 V
1778028949	51 Pkt	12 Pkt	0 Pkt	-76 dBm	0.04 V
1778028219	47 Pkt	18 Pkt	0 Pkt	-76 dBm	0.04 V
1778027489	54 Pkt	9 Pkt	1 Pkt	-75 dBm	0.04 V
1778026759	48 Pkt	15 Pkt	1 Pkt	-82 dBm	0.02 V
1778026029	56 Pkt	14 Pkt	0 Pkt	-72 dBm	0.04 V
1778025299	48 Pkt	16 Pkt	0 Pkt	-74 dBm	0.04 V
1778024569	43 Pkt	19 Pkt	0 Pkt	-71 dBm	0.04 V
1778023839	42 Pkt	14 Pkt	0 Pkt	-72 dBm	0.02 V
1778023109	50 Pkt	15 Pkt	0 Pkt	-74 dBm	0.04 V
1778022379	47 Pkt	14 Pkt	0 Pkt	-69 dBm	0.04 V
1778021649	47 Pkt	16 Pkt	0 Pkt	-70 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)