This is the latest recevied telemetry packets stored in our database for station/object ER-EA5URM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774112803 | 0 | 77 | 0 | 4 | 0 |
| 1774112203 | 0 | 227 | 0 | 16 | 0 |
| 1774111602 | 0 | 50 | 0 | 8 | 0 |
| 1774111002 | 0 | 57 | 0 | 8 | 0 |
| 1774110402 | 0 | 72 | 0 | 7 | 0 |
| 1774109802 | 0 | 32 | 0 | 7 | 0 |
| 1774109202 | 0 | 835 | 0 | 16 | 0 |
| 1774108603 | 0 | 931 | 0 | 12 | 0 |
| 1774108002 | 0 | 953 | 0 | 10 | 0 |
| 1774107402 | 0 | 925 | 0 | 12 | 0 |
| 1774106802 | 0 | 836 | 0 | 10 | 0 |
| 1774106202 | 126 | 651 | 2 | 6 | 0 |
| 1774105602 | 126 | 719 | 3 | 10 | 0 |
| 1774105003 | 0 | 261 | 0 | 9 | 0 |
| 1774104402 | 0 | 6 | 0 | 3 | 0 |
| 1774103802 | 0 | 76 | 0 | 10 | 0 |
| 1774103202 | 0 | 60 | 0 | 7 | 0 |
| 1774102602 | 0 | 24 | 0 | 3 | 0 |
| 1774102002 | 0 | 50 | 0 | 9 | 0 |
| 1774101402 | 0 | 35 | 1 | 5 | 0 |
| 1774100761 | 0 | 32 | 0 | 6 | 0 |
| 1774100161 | 0 | 43 | 0 | 7 | 0 |
| 1774099561 | 0 | 30 | 0 | 3 | 0 |
| 1774098961 | 0 | 0 | 0 | 0 | 0 |
| 1774098361 | 0 | 78 | 0 | 3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)