This is the latest recevied telemetry packets stored in our database for station/object ER-EA5AWB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774133024 | 0 | 61 | 0 | 7 | 0 |
| 1774132424 | 0 | 316 | 0 | 18 | 0 |
| 1774131824 | 0 | 0 | 0 | 0 | 0 |
| 1774131224 | 0 | 56 | 0 | 4 | 0 |
| 1774130624 | 0 | 856 | 0 | 15 | 0 |
| 1774130024 | 0 | 913 | 0 | 10 | 0 |
| 1774129424 | 0 | 919 | 0 | 7 | 0 |
| 1774128824 | 0 | 904 | 0 | 9 | 0 |
| 1774128224 | 0 | 929 | 0 | 8 | 0 |
| 1774127624 | 0 | 621 | 0 | 8 | 0 |
| 1774127024 | 0 | 50 | 0 | 4 | 0 |
| 1774126424 | 0 | 16 | 0 | 3 | 0 |
| 1774125824 | 0 | 41 | 0 | 6 | 0 |
| 1774125224 | 0 | 91 | 0 | 9 | 0 |
| 1774124624 | 0 | 176 | 0 | 12 | 0 |
| 1774124024 | 0 | 72 | 0 | 9 | 0 |
| 1774123424 | 0 | 75 | 0 | 10 | 0 |
| 1774122824 | 0 | 173 | 0 | 16 | 0 |
| 1774122224 | 0 | 734 | 0 | 12 | 0 |
| 1774121624 | 0 | 608 | 0 | 15 | 0 |
| 1774121024 | 0 | 335 | 0 | 20 | 0 |
| 1774120424 | 0 | 231 | 0 | 11 | 0 |
| 1774119824 | 0 | 678 | 0 | 10 | 0 |
| 1774119224 | 0 | 536 | 0 | 13 | 0 |
| 1774118624 | 0 | 161 | 0 | 9 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)