APRS Track Direct

My position About ☰

reset

HS5AU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5AU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	Temp*	VIN*
1732271236	1 Pkt	1 Pkt	42.5 C	12.37 V
1732270641	0 Pkt	1 Pkt	43.3 C	11.98 V
1732270047	0 Pkt	0 Pkt	43.3 C	12 V
1732269453	0 Pkt	0 Pkt	44.2 C	12.05 V
1732268858	0 Pkt	5 Pkt	45 C	12.44 V
1732268264	1 Pkt	0 Pkt	45 C	12.44 V
1732267670	0 Pkt	0 Pkt	45 C	12.24 V
1732267075	1 Pkt	1 Pkt	45.8 C	13.53 V
1732266481	0 Pkt	0 Pkt	45.8 C	13.48 V
1732265886	2 Pkt	0 Pkt	45.8 C	13.57 V
1732265291	0 Pkt	2 Pkt	46.7 C	13.59 V
1732264697	1 Pkt	3 Pkt	45.8 C	13.5 V
1732264102	2 Pkt	0 Pkt	45.8 C	13.46 V
1732263507	0 Pkt	1 Pkt	45.8 C	13.55 V
1732262913	1 Pkt	0 Pkt	45 C	13.48 V
1732262318	0 Pkt	0 Pkt	45 C	13.41 V
1732261724	0 Pkt	1 Pkt	44.2 C	13.53 V
1732261129	1 Pkt	4 Pkt	43.3 C	13.53 V
1732260535	0 Pkt	0 Pkt	43.3 C	13.46 V
1732259941	1 Pkt	1 Pkt	43.3 C	13.5 V
1732259346	1 Pkt	0 Pkt	43.3 C	13.48 V
1732258751	1 Pkt	0 Pkt	43.3 C	13.25 V
1732258156	0 Pkt	1 Pkt	43.3 C	13.57 V
1732257562	2 Pkt	4 Pkt	43.3 C	13.48 V
1732256962	0 Pkt	0 Pkt	43.3 C	13.55 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

Temp: 0, 1, 0

GPS: 0, 1, 0

VIN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)