APRS Track Direct

My position About ☰

reset

SR8NL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8NL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	DgR_1h*	Rx_1h*	Dg_1h*	Eff_1h*	Temp*
1836274828	3.08 Pcnt	580 Pkt	10 Pkt	57 %	23 C
1836274528	2.73 Pcnt	580 Pkt	10 Pkt	56 %	23 C
1836274377	2.86 Pcnt	590 Pkt	10 Pkt	57 %	23 C
1836274228	3.03 Pcnt	590 Pkt	10 Pkt	57 %	23 C
1836273928	2.91 Pcnt	580 Pkt	10 Pkt	57 %	23 C
1770114206	11.76 Pcnt	180 Pkt	20 Pkt	42 %	31 C
1770113906	11.52 Pcnt	190 Pkt	20 Pkt	43 %	31 C
1770113606	11.4 Pcnt	190 Pkt	20 Pkt	44 %	31.5 C
1770113306	10.95 Pcnt	200 Pkt	20 Pkt	45 %	31 C
1770113006	9.77 Pcnt	210 Pkt	20 Pkt	47 %	31 C
1770112706	10.28 Pcnt	210 Pkt	20 Pkt	46 %	31 C
1770112406	10.65 Pcnt	210 Pkt	20 Pkt	45 %	31.5 C
1770112106	10.5 Pcnt	210 Pkt	20 Pkt	45 %	31 C
1770111806	11.11 Pcnt	220 Pkt	20 Pkt	45 %	31 C
1770111506	11.25 Pcnt	240 Pkt	20 Pkt	45 %	31 C
1770111206	11.32 Pcnt	260 Pkt	30 Pkt	47 %	31 C
1770110906	11.23 Pcnt	280 Pkt	30 Pkt	48 %	31 C
1770110606	11.04 Pcnt	290 Pkt	30 Pkt	50 %	31 C
1770110306	10.16 Pcnt	300 Pkt	30 Pkt	50 %	31 C
1770110006	10.16 Pcnt	310 Pkt	30 Pkt	50 %	31 C
1770109706	10.26 Pcnt	310 Pkt	30 Pkt	50 %	31 C
1770109406	9.75 Pcnt	310 Pkt	30 Pkt	51 %	31 C
1770109106	10.54 Pcnt	330 Pkt	30 Pkt	52 %	31 C
1770108806	11.45 Pcnt	350 Pkt	40 Pkt	53 %	31 C
1770108506	10.83 Pcnt	390 Pkt	40 Pkt	57 %	31.5 C

*Used Equation Coefficients:

DgR_1h: 0, 0.001, 0

Rx_1h: 0, 10, 0

Dg_1h: 0, 10, 0

Eff_1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)