APRS Track Direct

My position About ☰

reset

IZ1XBB-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1XBB-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1758210796	13.8 Volt	780 Pkt	210 Pkt	73 Pcnt
1758210191	13.8 Volt	740 Pkt	190 Pkt	72 Pcnt
1758209591	13.8 Volt	730 Pkt	180 Pkt	72 Pcnt
1758208989	13.8 Volt	700 Pkt	180 Pkt	71 Pcnt
1758208389	13.8 Volt	680 Pkt	180 Pkt	71 Pcnt
1758207788	13.8 Volt	650 Pkt	170 Pkt	69 Pcnt
1758207188	12 Volt	620 Pkt	160 Pkt	67 Pcnt
1758206595	13.8 Volt	630 Pkt	160 Pkt	67 Pcnt
1758205987	13.8 Volt	620 Pkt	170 Pkt	65 Pcnt
1758205386	13.8 Volt	640 Pkt	160 Pkt	66 Pcnt
1758204785	13.8 Volt	630 Pkt	160 Pkt	66 Pcnt
1758204185	13.8 Volt	650 Pkt	160 Pkt	67 Pcnt
1758203584	13.8 Volt	640 Pkt	170 Pkt	68 Pcnt
1758202984	13.8 Volt	640 Pkt	170 Pkt	68 Pcnt
1758202383	13.28 Volt	620 Pkt	170 Pkt	68 Pcnt
1758201782	13.58 Volt	600 Pkt	160 Pkt	67 Pcnt
1758201186	13.58 Volt	610 Pkt	170 Pkt	67 Pcnt
1758200581	13.35 Volt	600 Pkt	160 Pkt	68 Pcnt
1758199981	13.28 Volt	630 Pkt	170 Pkt	69 Pcnt
1758199382	13.8 Volt	640 Pkt	180 Pkt	68 Pcnt
1758198780	13.13 Volt	630 Pkt	170 Pkt	67 Pcnt
1758198179	13.8 Volt	640 Pkt	170 Pkt	67 Pcnt
1758197578	13.8 Volt	610 Pkt	170 Pkt	65 Pcnt
1758196978	13.8 Volt	590 Pkt	170 Pkt	64 Pcnt
1758196377	13.8 Volt	550 Pkt	150 Pkt	63 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)