APRS Track Direct

My position About ☰

reset

WC4PEM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Rx1h*	Eff1h*
1836274406	32 C	13.8 Volt	830 Pkt	66 Pcnt
1836274406	32 C	13.8 Volt	830 Pkt	66 Pcnt
1836274256	32 C	13.8 Volt	830 Pkt	65 Pcnt
1836274256	32 C	13.8 Volt	830 Pkt	65 Pcnt
1782495185	28 C	13.88 Volt	1080 Pkt	80 Pcnt
1782495184	28 C	13.88 Volt	1080 Pkt	80 Pcnt
1782494585	28 C	13.88 Volt	1110 Pkt	80 Pcnt
1782494584	28 C	13.88 Volt	1110 Pkt	80 Pcnt
1782493985	28 C	13.88 Volt	1110 Pkt	81 Pcnt
1782493984	28 C	13.88 Volt	1110 Pkt	81 Pcnt
1782493385	28 C	13.88 Volt	1140 Pkt	81 Pcnt
1782493384	28 C	13.88 Volt	1140 Pkt	81 Pcnt
1782492785	28 C	13.88 Volt	1160 Pkt	82 Pcnt
1782492784	28 C	13.88 Volt	1160 Pkt	82 Pcnt
1782492185	28 C	13.88 Volt	1140 Pkt	82 Pcnt
1782492184	28 C	13.88 Volt	1140 Pkt	82 Pcnt
1782491585	28 C	13.88 Volt	1150 Pkt	82 Pcnt
1782491584	28 C	13.88 Volt	1150 Pkt	82 Pcnt
1782490985	28 C	13.88 Volt	1140 Pkt	82 Pcnt
1782490984	28 C	13.88 Volt	1140 Pkt	82 Pcnt
1782490385	28 C	13.88 Volt	1140 Pkt	82 Pcnt
1782490384	28 C	13.88 Volt	1140 Pkt	82 Pcnt
1782489785	28 C	13.88 Volt	1110 Pkt	81 Pcnt
1782489784	28 C	13.88 Volt	1110 Pkt	81 Pcnt
1782489185	28 C	13.88 Volt	1100 Pkt	80 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)