APRS Track Direct

My position About ☰

reset

HS3OY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3OY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1750134158	58 Pkt	0 Pkt	0 Pkt	-65 dBm	14.89 V
1750132922	52 Pkt	0 Pkt	0 Pkt	-65 dBm	14.89 V
1750131686	41 Pkt	1 Pkt	2 Pkt	-65 dBm	14.93 V
1750130453	22 Pkt	0 Pkt	0 Pkt	-65 dBm	14.89 V
1750129225	31 Pkt	0 Pkt	0 Pkt	-64 dBm	14.91 V
1750127994	18 Pkt	2 Pkt	0 Pkt	-65 dBm	14.83 V
1750126766	17 Pkt	0 Pkt	0 Pkt	-66 dBm	14.89 V
1750125537	16 Pkt	1 Pkt	0 Pkt	-65 dBm	14.83 V
1750124309	15 Pkt	0 Pkt	0 Pkt	-66 dBm	14.83 V
1750123080	17 Pkt	0 Pkt	2 Pkt	-65 dBm	14.93 V
1750121846	18 Pkt	0 Pkt	0 Pkt	-64 dBm	14.83 V
1750120618	32 Pkt	1 Pkt	0 Pkt	-64 dBm	14.93 V
1750119813	-	-	-	-	-
1750119387	33 Pkt	0 Pkt	0 Pkt	-65 dBm	14.83 V
1750118156	40 Pkt	1 Pkt	0 Pkt	-65 dBm	14.89 V
1750116922	35 Pkt	0 Pkt	0 Pkt	-63 dBm	14.81 V
1750115690	19 Pkt	0 Pkt	0 Pkt	-65 dBm	14.93 V
1750114461	23 Pkt	0 Pkt	0 Pkt	-65 dBm	14.93 V
1750113230	21 Pkt	0 Pkt	0 Pkt	-63 dBm	14.89 V
1750112001	13 Pkt	0 Pkt	0 Pkt	-63 dBm	14.89 V
1750110774	17 Pkt	1 Pkt	0 Pkt	-63 dBm	14.93 V
1750109545	25 Pkt	0 Pkt	0 Pkt	-63 dBm	14.93 V
1750108314	28 Pkt	0 Pkt	0 Pkt	-63 dBm	14.89 V
1750107083	15 Pkt	0 Pkt	0 Pkt	-65 dBm	14.83 V
1750105856	21 Pkt	0 Pkt	0 Pkt	-63 dBm	14.79 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)