This is the latest recevied telemetry packets stored in our database for station/object E25XLD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1754472864 | 2 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 13.41 V |
1754472240 | 3 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 13.41 V |
1754471615 | 1 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 13.43 V |
1754470991 | 0 Pkt | 0 Pkt | 1 Pkt | -68 dBm | 13.41 V |
1754470367 | 1 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 13.41 V |
1754469743 | 1 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 13.41 V |
1754469119 | 0 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 13.45 V |
1754468496 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 13.43 V |
1754467872 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 13.31 V |
1754467248 | 0 Pkt | 1 Pkt | 0 Pkt | -67 dBm | 13.41 V |
1754466623 | 0 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 13.41 V |
1754466000 | 3 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 13.45 V |
1754465376 | 3 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 13.45 V |
1754464752 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 13.45 V |
1754464127 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 13.39 V |
1754463504 | 0 Pkt | 1 Pkt | 0 Pkt | -65 dBm | 13.43 V |
1754462880 | 1 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 13.43 V |
1754462256 | 1 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 13.43 V |
1754461632 | 1 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 13.43 V |
1754461008 | 1 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 13.41 V |
1754460384 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 13.41 V |
1754459760 | 2 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 13.41 V |
1754459136 | 3 Pkt | 1 Pkt | 0 Pkt | -67 dBm | 13.45 V |
1754458512 | 2 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 13.43 V |
1754457887 | 1 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 13.43 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)