This is the latest recevied telemetry packets stored in our database for station/object SN0PEK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Vsolar* | SunElev* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758228419 | -0.02 degC | 0 Volts | 47.59 deg | 0 | 0 |
| 1758228210 | -0.02 degC | 0 Volts | 47.87 deg | 0 | 0 |
| 1758228144 | -0.02 degC | 0 Volts | 47.93 deg | 0 | 0 |
| 1758227941 | -0.02 degC | 0 Volts | 48.18 deg | 0 | 0 |
| 1758227870 | -0.02 degC | 0 Volts | 48.28 deg | 0 | 0 |
| 1758227335 | -0.02 degC | 0 Volts | 48.84 deg | 0 | 0 |
| 1758226965 | -0.02 degC | 0 Volts | 49.19 deg | 0 | 0 |
| 1758226837 | -0.02 degC | 0 Volts | 49.28 deg | 0 | 0 |
| 1758226778 | -0.02 degC | 0 Volts | 49.35 deg | 0 | 0 |
| 1758226716 | -0.02 degC | 0 Volts | 49.41 deg | 0 | 0 |
| 1758226640 | -0.02 degC | 0 Volts | 49.44 deg | 0 | 0 |
| 1758226513 | -0.02 degC | 0 Volts | 49.56 deg | 0 | 0 |
| 1758226365 | -0.02 degC | 0 Volts | 49.66 deg | 0 | 0 |
| 1758226069 | -0.02 degC | 0 Volts | 49.85 deg | 0 | 0 |
| 1758226010 | -0.02 degC | 0 Volts | 49.88 deg | 0 | 0 |
| 1758225691 | -0.02 degC | 0 Volts | 50.04 deg | 0 | 0 |
| 1758225443 | -0.02 degC | 0 Volts | 50.13 deg | 0 | 0 |
| 1758225104 | -0.02 degC | 0 Volts | 50.25 deg | 0 | 0 |
| 1758224969 | -0.02 degC | 0 Volts | 50.29 deg | 0 | 0 |
| 1758224660 | -0.02 degC | 0 Volts | 50.35 deg | 0 | 0 |
| 1758224537 | -0.02 degC | 0 Volts | 50.35 deg | 0 | 0 |
| 1758224476 | -0.02 degC | 0 Volts | 50.35 deg | 0 | 0 |
| 1758224356 | -0.02 degC | 0 Volts | 50.35 deg | 0 | 0 |
| 1758223989 | -0.02 degC | 0 Volts | 50.35 deg | 0 | 0 |
| 1758223755 | -0.02 degC | 0 Volts | 50.32 deg | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.43, -80
Vsolar: 0, 0.1, 0
SunElev: 0, 0.3137, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)