This is the latest recevied telemetry packets stored in our database for station/object VU2FI-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | WiFi* | BaudRate* |
|---|---|---|---|---|---|
| 1836274502 | 0 Pkt | 0 Pkt | 0 Pkt | 55 dB | 9600 bps |
| 1836274352 | 0 Pkt | 0 Pkt | 0 Pkt | 55 dB | 9600 bps |
| 1836273902 | 0 Pkt | 0 Pkt | 0 Pkt | 56 dB | 9600 bps |
| 1768371990 | 0 Pkt | 0 Pkt | 0 Pkt | 50 dB | 9600 bps |
| 1768371389 | 0 Pkt | 0 Pkt | 0 Pkt | 47 dB | 9600 bps |
| 1768370789 | 0 Pkt | 0 Pkt | 0 Pkt | 47 dB | 9600 bps |
| 1768370189 | 0 Pkt | 0 Pkt | 0 Pkt | 45 dB | 9600 bps |
| 1768369589 | 0 Pkt | 0 Pkt | 0 Pkt | 48 dB | 9600 bps |
| 1768368989 | 0 Pkt | 0 Pkt | 0 Pkt | 45 dB | 9600 bps |
| 1768368389 | 0 Pkt | 0 Pkt | 0 Pkt | 42 dB | 9600 bps |
| 1768367789 | 0 Pkt | 0 Pkt | 0 Pkt | 41 dB | 9600 bps |
| 1768367189 | 0 Pkt | 0 Pkt | 0 Pkt | 45 dB | 9600 bps |
| 1768366589 | 0 Pkt | 0 Pkt | 0 Pkt | 50 dB | 9600 bps |
| 1768365989 | 0 Pkt | 0 Pkt | 0 Pkt | 51 dB | 9600 bps |
| 1768365389 | 0 Pkt | 0 Pkt | 0 Pkt | 52 dB | 9600 bps |
| 1768364789 | 0 Pkt | 0 Pkt | 0 Pkt | 50 dB | 9600 bps |
| 1768364189 | 0 Pkt | 0 Pkt | 0 Pkt | 49 dB | 9600 bps |
| 1768363589 | 0 Pkt | 0 Pkt | 0 Pkt | 51 dB | 9600 bps |
| 1768362989 | 0 Pkt | 0 Pkt | 0 Pkt | 53 dB | 9600 bps |
| 1768362389 | 0 Pkt | 0 Pkt | 0 Pkt | 50 dB | 9600 bps |
| 1768361789 | 0 Pkt | 0 Pkt | 0 Pkt | 53 dB | 9600 bps |
| 1768361189 | 0 Pkt | 0 Pkt | 0 Pkt | 49 dB | 9600 bps |
| 1768360589 | 0 Pkt | 0 Pkt | 0 Pkt | 44 dB | 9600 bps |
| 1768360021 | 0 Pkt | 0 Pkt | 0 Pkt | 57 dB | 9600 bps |
| 1768359381 | 0 Pkt | 0 Pkt | 0 Pkt | 46 dB | 9600 bps |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
WiFi: 0, 1, 100
BaudRate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)