This is the latest recevied telemetry packets stored in our database for station/object IR2DE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff1h* |
|---|---|---|---|---|---|
| 1836274680 | 1 Pkt | 10 Pkt | 0 Pkt | 3.18 Pcnt | 50 Pcnt |
| 1836274530 | 3 Pkt | 0 Pkt | 0 Pkt | 3.18 Pcnt | 37 Pcnt |
| 1836274380 | 0 Pkt | 10 Pkt | 0 Pkt | 3.18 Pcnt | 52 Pcnt |
| 1836274230 | 3 Pkt | 10 Pkt | 0 Pkt | 3.18 Pcnt | 40 Pcnt |
| 1836274080 | 0 Pkt | 10 Pkt | 0 Pkt | 3.18 Pcnt | 54 Pcnt |
| 1770119888 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 25 Pcnt |
| 1770119588 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 27 Pcnt |
| 1770119288 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 30 Pcnt |
| 1770118988 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 33 Pcnt |
| 1770118688 | 1 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 30 Pcnt |
| 1770118388 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 18 Pcnt |
| 1770118088 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 23 Pcnt |
| 1770117788 | 1 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 21 Pcnt |
| 1770117488 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 15 Pcnt |
| 1770117188 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 21 Pcnt |
| 1770116888 | 1 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 21 Pcnt |
| 1770116588 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 14 Pcnt |
| 1770116288 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 19 Pcnt |
| 1770115988 | 1 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 18 Pcnt |
| 1770115688 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 10 Pcnt |
| 1770115388 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 12 Pcnt |
| 1770115088 | 1 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 13 Pcnt |
| 1770114788 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 10 Pcnt |
| 1770114488 | 0 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 13 Pcnt |
| 1770114188 | 1 Pkt | 0 Pkt | 0 Pkt | 8.38 Pcnt | 14 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)