APRS Track Direct

My position About ☰

reset

SR2ZFT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2ZFT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274770	13.8 Volt	470 Pkt	140 Pkt	67 Pcnt
1836274522	13.8 Volt	450 Pkt	140 Pkt	69 Pcnt
1836274105	13.8 Volt	460 Pkt	140 Pkt	65 Pcnt
1770147356	13.8 Volt	290 Pkt	120 Pkt	73 Pcnt
1770146751	13.8 Volt	290 Pkt	120 Pkt	73 Pcnt
1770146170	13.8 Volt	300 Pkt	130 Pkt	75 Pcnt
1770145548	13.8 Volt	280 Pkt	110 Pkt	72 Pcnt
1770145408	13.8 Volt	270 Pkt	120 Pkt	73 Pcnt
1770144372	13.8 Volt	270 Pkt	120 Pkt	72 Pcnt
1770143750	13.8 Volt	270 Pkt	120 Pkt	74 Pcnt
1770143150	13.8 Volt	270 Pkt	110 Pkt	73 Pcnt
1770142543	13.8 Volt	250 Pkt	110 Pkt	69 Pcnt
1770142172	13.8 Volt	240 Pkt	110 Pkt	68 Pcnt
1770141343	13.8 Volt	240 Pkt	120 Pkt	65 Pcnt
1770140749	13.8 Volt	260 Pkt	130 Pkt	66 Pcnt
1770140144	13.8 Volt	280 Pkt	130 Pkt	67 Pcnt
1770139552	13.8 Volt	280 Pkt	140 Pkt	68 Pcnt
1770138944	13.8 Volt	280 Pkt	130 Pkt	69 Pcnt
1770138340	13.8 Volt	290 Pkt	130 Pkt	71 Pcnt
1770137753	13.8 Volt	280 Pkt	130 Pkt	76 Pcnt
1770137140	13.8 Volt	260 Pkt	110 Pkt	75 Pcnt
1770136538	13.8 Volt	240 Pkt	110 Pkt	72 Pcnt
1770135942	13.8 Volt	250 Pkt	110 Pkt	73 Pcnt
1770135355	13.8 Volt	260 Pkt	110 Pkt	75 Pcnt
1770134761	13.8 Volt	260 Pkt	120 Pkt	74 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)