APRS Track Direct

My position About ☰

reset

HUGOCO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HUGOCO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1770144410	14.06 Volt	580 Pkt	150 Pkt	99 Pcnt
1770143510	14.14 Volt	560 Pkt	150 Pkt	98 Pcnt
1770142610	14.14 Volt	530 Pkt	130 Pkt	98 Pcnt
1770141710	14.14 Volt	540 Pkt	150 Pkt	98 Pcnt
1770140810	14.14 Volt	570 Pkt	160 Pkt	98 Pcnt
1770139910	14.14 Volt	630 Pkt	170 Pkt	98 Pcnt
1770139010	14.14 Volt	690 Pkt	190 Pkt	98 Pcnt
1770138110	14.14 Volt	640 Pkt	160 Pkt	98 Pcnt
1770137210	14.14 Volt	570 Pkt	140 Pkt	98 Pcnt
1770136310	14.14 Volt	500 Pkt	120 Pkt	99 Pcnt
1770135410	14.14 Volt	410 Pkt	100 Pkt	99 Pcnt
1770134510	14.14 Volt	430 Pkt	100 Pkt	100 Pcnt
1770133610	14.14 Volt	450 Pkt	110 Pkt	100 Pcnt
1770132710	14.14 Volt	470 Pkt	120 Pkt	100 Pcnt
1770131810	14.14 Volt	490 Pkt	130 Pkt	100 Pcnt
1770130910	14.14 Volt	490 Pkt	130 Pkt	99 Pcnt
1770130010	14.14 Volt	460 Pkt	120 Pkt	99 Pcnt
1770129110	14.14 Volt	490 Pkt	130 Pkt	99 Pcnt
1770128210	14.14 Volt	460 Pkt	110 Pkt	99 Pcnt
1770127310	14.14 Volt	430 Pkt	100 Pkt	99 Pcnt
1770126410	14.14 Volt	390 Pkt	90 Pkt	100 Pcnt
1770125510	14.14 Volt	370 Pkt	90 Pkt	99 Pcnt
1770124610	14.14 Volt	330 Pkt	80 Pkt	99 Pcnt
1770123710	14.14 Volt	330 Pkt	80 Pkt	99 Pcnt
1770122810	14.14 Volt	330 Pkt	80 Pkt	99 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)