APRS Track Direct

My position About ☰

reset

UR7D-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UR7D-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274679	15.09 Volt	280 Pkt	90 Pkt	87 Pcnt
1836274677	15.09 Volt	280 Pkt	90 Pkt	87 Pcnt
1836274529	15.09 Volt	280 Pkt	100 Pkt	88 Pcnt
1836274528	15.09 Volt	280 Pkt	100 Pkt	88 Pcnt
1836274379	15.09 Volt	280 Pkt	100 Pkt	88 Pcnt
1836274377	15.09 Volt	280 Pkt	100 Pkt	88 Pcnt
1836274229	15.09 Volt	280 Pkt	100 Pkt	88 Pcnt
1836274228	15.09 Volt	280 Pkt	100 Pkt	88 Pcnt
1836274079	15.09 Volt	280 Pkt	100 Pkt	88 Pcnt
1836274077	15.09 Volt	280 Pkt	100 Pkt	88 Pcnt
1766272356	13.04 Volt	200 Pkt	100 Pkt	97 Pcnt
1766272352	13.04 Volt	200 Pkt	100 Pkt	97 Pcnt
1766272055	13.04 Volt	210 Pkt	100 Pkt	98 Pcnt
1766272052	13.04 Volt	210 Pkt	100 Pkt	98 Pcnt
1766271755	13.04 Volt	200 Pkt	100 Pkt	99 Pcnt
1766271752	13.04 Volt	200 Pkt	100 Pkt	99 Pcnt
1766271455	13.04 Volt	210 Pkt	100 Pkt	99 Pcnt
1766271452	13.04 Volt	210 Pkt	100 Pkt	99 Pcnt
1766271154	13.04 Volt	200 Pkt	100 Pkt	99 Pcnt
1766271151	13.04 Volt	200 Pkt	100 Pkt	99 Pcnt
1766270854	13.04 Volt	200 Pkt	100 Pkt	98 Pcnt
1766270851	13.04 Volt	200 Pkt	100 Pkt	98 Pcnt
1766270554	13.04 Volt	200 Pkt	100 Pkt	97 Pcnt
1766270551	13.04 Volt	200 Pkt	100 Pkt	97 Pcnt
1766270253	13.04 Volt	200 Pkt	100 Pkt	98 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)