This is the latest recevied telemetry packets stored in our database for station/object ON3RIP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794907840 | 17 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794906934 | 1002 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794906031 | 983 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794905128 | 957 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794904225 | 928 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794903321 | 909 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794902415 | 883 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794901512 | 840 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794900609 | 819 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794899706 | 779 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794898802 | 758 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794897899 | 711 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794896996 | 689 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1794896093 | 670 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794895189 | 652 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794894285 | 633 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794893382 | 613 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794892479 | 584 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794891576 | 565 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794890673 | 545 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794889770 | 527 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794888867 | 509 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794887964 | 487 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1794887060 | 462 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)