APRS Track Direct

My position About ☰

reset

KN6RO-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KN6RO-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1770131996	13.35 Volt	1340 Pkt	290 Pkt	63 Pcnt
1770131396	13.35 Volt	1350 Pkt	280 Pkt	62 Pcnt
1770130796	13.35 Volt	1350 Pkt	290 Pkt	63 Pcnt
1770130196	13.35 Volt	1380 Pkt	300 Pkt	65 Pcnt
1770129596	13.35 Volt	1390 Pkt	300 Pkt	64 Pcnt
1770128996	13.2 Volt	1390 Pkt	310 Pkt	64 Pcnt
1770128396	13.35 Volt	1380 Pkt	310 Pkt	65 Pcnt
1770127796	13.35 Volt	1390 Pkt	320 Pkt	65 Pcnt
1770127196	13.35 Volt	1400 Pkt	310 Pkt	66 Pcnt
1770126596	13.35 Volt	1400 Pkt	320 Pkt	66 Pcnt
1770125997	13.35 Volt	1370 Pkt	300 Pkt	66 Pcnt
1770125396	13.35 Volt	1370 Pkt	300 Pkt	66 Pcnt
1770124796	13.35 Volt	1370 Pkt	290 Pkt	66 Pcnt
1770124197	13.35 Volt	1370 Pkt	280 Pkt	66 Pcnt
1770123596	13.35 Volt	1340 Pkt	280 Pkt	64 Pcnt
1770122996	13.35 Volt	1300 Pkt	260 Pkt	63 Pcnt
1770122396	13.35 Volt	1340 Pkt	270 Pkt	64 Pcnt
1770121798	13.35 Volt	1330 Pkt	270 Pkt	64 Pcnt
1770121196	13.35 Volt	1320 Pkt	270 Pkt	63 Pcnt
1770120596	13.35 Volt	1330 Pkt	270 Pkt	63 Pcnt
1770119996	13.35 Volt	1330 Pkt	270 Pkt	64 Pcnt
1770119397	13.35 Volt	1360 Pkt	270 Pkt	64 Pcnt
1770118796	13.28 Volt	1320 Pkt	260 Pkt	64 Pcnt
1770118196	13.35 Volt	1300 Pkt	250 Pkt	64 Pcnt
1770117596	13.35 Volt	1280 Pkt	240 Pkt	64 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)