This is the latest recevied telemetry packets stored in our database for station/object IR2DD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff* |
|---|---|---|---|---|---|
| 1758173743 | 47 Pkt | 250 Pkt | 2 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758173443 | 50 Pkt | 240 Pkt | 3 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758173143 | 47 Pkt | 240 Pkt | 3 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758172843 | 36 Pkt | 230 Pkt | 1 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758172543 | 31 Pkt | 230 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758172243 | 35 Pkt | 230 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758171943 | 35 Pkt | 230 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758171643 | 36 Pkt | 230 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758171343 | 43 Pkt | 230 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758171043 | 41 Pkt | 230 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758170743 | 28 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758170443 | 37 Pkt | 220 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758170143 | 37 Pkt | 220 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758169843 | 36 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758169543 | 34 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758169243 | 32 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758168943 | 35 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758168643 | 38 Pkt | 220 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758168343 | 28 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758168043 | 35 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758167743 | 33 Pkt | 220 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758167443 | 32 Pkt | 220 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758167143 | 30 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758166843 | 33 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
| 1758166543 | 34 Pkt | 210 Pkt | 0 Pkt | 0.9 Pcnt | 73 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)