This is the latest recevied telemetry packets stored in our database for station/object IU1DOF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754154679 | 26 | 292 | 0 | 0 | 0 |
| 1754154055 | 24 | 292 | 0 | 0 | 0 |
| 1754153441 | 24 | 292 | 0 | 0 | 0 |
| 1754152829 | 25 | 292 | 0 | 0 | 0 |
| 1754152198 | 22 | 292 | 0 | 0 | 0 |
| 1754151581 | 26 | 292 | 0 | 0 | 0 |
| 1754150967 | 24 | 292 | 0 | 0 | 0 |
| 1754150343 | 25 | 292 | 0 | 0 | 0 |
| 1754149718 | 24 | 292 | 0 | 0 | 0 |
| 1754149095 | 24 | 292 | 0 | 0 | 0 |
| 1754148471 | 25 | 292 | 0 | 0 | 0 |
| 1754147862 | 24 | 292 | 0 | 0 | 0 |
| 1754147255 | 23 | 292 | 0 | 0 | 0 |
| 1754146647 | 28 | 292 | 0 | 0 | 0 |
| 1754146038 | 25 | 292 | 0 | 0 | 0 |
| 1754145431 | 26 | 293 | 0 | 0 | 0 |
| 1754144823 | 25 | 292 | 0 | 0 | 0 |
| 1754144201 | 24 | 292 | 0 | 0 | 0 |
| 1754143591 | 26 | 292 | 0 | 0 | 0 |
| 1754142983 | 25 | 292 | 0 | 0 | 0 |
| 1754142359 | 25 | 292 | 0 | 0 | 0 |
| 1754141751 | 23 | 292 | 0 | 0 | 0 |
| 1754141142 | 22 | 293 | 0 | 0 | 0 |
| 1754140535 | 22 | 293 | 0 | 0 | 0 |
| 1754139926 | 23 | 292 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)