This is the latest recevied telemetry packets stored in our database for station/object I5EKX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758236504 | 432 | 0 | 0 | 0 | 0 |
| 1758235604 | 430 | 0 | 0 | 0 | 0 |
| 1758234704 | 421 | 0 | 0 | 0 | 0 |
| 1758233804 | 418 | 0 | 0 | 0 | 0 |
| 1758232904 | 425 | 0 | 0 | 0 | 0 |
| 1758232004 | 424 | 0 | 0 | 0 | 0 |
| 1758231104 | 433 | 0 | 0 | 0 | 0 |
| 1758230203 | 427 | 0 | 0 | 0 | 0 |
| 1758229303 | 428 | 0 | 0 | 0 | 0 |
| 1758228403 | 419 | 0 | 0 | 0 | 0 |
| 1758227504 | 432 | 0 | 0 | 0 | 0 |
| 1758226603 | 425 | 0 | 0 | 0 | 0 |
| 1758225703 | 423 | 0 | 0 | 0 | 0 |
| 1758224803 | 426 | 0 | 0 | 0 | 0 |
| 1758223902 | 419 | 0 | 0 | 0 | 0 |
| 1758223002 | 429 | 0 | 0 | 0 | 0 |
| 1758222102 | 419 | 0 | 0 | 0 | 0 |
| 1758221202 | 429 | 0 | 0 | 0 | 0 |
| 1758220302 | 426 | 0 | 0 | 0 | 0 |
| 1758219401 | 426 | 0 | 0 | 0 | 0 |
| 1758218501 | 418 | 0 | 0 | 0 | 0 |
| 1758217601 | 425 | 0 | 0 | 0 | 0 |
| 1758216701 | 424 | 0 | 0 | 0 | 0 |
| 1758215801 | 428 | 0 | 0 | 0 | 0 |
| 1758214901 | 424 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)