This is the latest recevied telemetry packets stored in our database for station/object OH7FQP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx1h* | Rx10m* | Eff1h* | Eff* | A5* |
|---|---|---|---|---|---|
| 1836274495 | 10 Pkt | 0 Pkt | 95 Pcnt | 73 Pcnt | 0 None |
| 1774125662 | 0 Pkt | 0 Pkt | 100 Pcnt | 73 Pcnt | 0 None |
| 1774123861 | 0 Pkt | 0 Pkt | 100 Pcnt | 73 Pcnt | 0 None |
| 1774122059 | 0 Pkt | 0 Pkt | 0 Pcnt | 73 Pcnt | 0 None |
| 1774120257 | 0 Pkt | 0 Pkt | 0 Pcnt | 73 Pcnt | 0 None |
| 1774118455 | 0 Pkt | 0 Pkt | 0 Pcnt | 73 Pcnt | 0 None |
| 1774116654 | 0 Pkt | 0 Pkt | 33 Pcnt | 73 Pcnt | 0 None |
| 1774114852 | 0 Pkt | 0 Pkt | 40 Pcnt | 73 Pcnt | 0 None |
| 1774113050 | 0 Pkt | 0 Pkt | 25 Pcnt | 73 Pcnt | 0 None |
| 1774111248 | 0 Pkt | 0 Pkt | 25 Pcnt | 73 Pcnt | 0 None |
| 1774109446 | 0 Pkt | 0 Pkt | 0 Pcnt | 73 Pcnt | 0 None |
| 1774107645 | 0 Pkt | 0 Pkt | 50 Pcnt | 73 Pcnt | 0 None |
| 1774105843 | 0 Pkt | 4 Pkt | 54 Pcnt | 73 Pcnt | 0 None |
| 1774104041 | 0 Pkt | 0 Pkt | 20 Pcnt | 73 Pcnt | 0 None |
| 1774102239 | 0 Pkt | 0 Pkt | 28 Pcnt | 73 Pcnt | 0 None |
| 1774100438 | 0 Pkt | 1 Pkt | 60 Pcnt | 73 Pcnt | 0 None |
| 1774098636 | 0 Pkt | 0 Pkt | 66 Pcnt | 73 Pcnt | 0 None |
| 1774096834 | 0 Pkt | 0 Pkt | 66 Pcnt | 73 Pcnt | 0 None |
| 1774095032 | 0 Pkt | 0 Pkt | 50 Pcnt | 73 Pcnt | 0 None |
| 1774093231 | 0 Pkt | 0 Pkt | 25 Pcnt | 73 Pcnt | 0 None |
| 1774091429 | 0 Pkt | 0 Pkt | 50 Pcnt | 73 Pcnt | 0 None |
| 1774089627 | 0 Pkt | 0 Pkt | 30 Pcnt | 73 Pcnt | 0 None |
| 1774087825 | 0 Pkt | 0 Pkt | 27 Pcnt | 73 Pcnt | 0 None |
| 1774086024 | 0 Pkt | 1 Pkt | 41 Pcnt | 73 Pcnt | 0 None |
| 1774084222 | 0 Pkt | 0 Pkt | 27 Pcnt | 73 Pcnt | 0 None |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Rx10m: 0, 1, 0
Eff1h: 0, 1, 0
Eff: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)