APRS Track Direct

My position About ☰

reset

K2DLL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2DLL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790649384	15 Volt	1300 Pkt	20 Pkt	81 Pcnt
1790648484	15.08 Volt	1280 Pkt	20 Pkt	82 Pcnt
1790647582	15 Volt	1250 Pkt	20 Pkt	82 Pcnt
1790646684	15 Volt	1250 Pkt	20 Pkt	83 Pcnt
1790645781	15 Volt	1280 Pkt	20 Pkt	83 Pcnt
1790644880	15 Volt	1320 Pkt	10 Pkt	82 Pcnt
1790643979	15 Volt	1310 Pkt	20 Pkt	83 Pcnt
1790643078	15 Volt	1330 Pkt	20 Pkt	83 Pcnt
1790642178	15 Volt	1320 Pkt	20 Pkt	83 Pcnt
1790641277	15 Volt	1320 Pkt	20 Pkt	84 Pcnt
1790640375	15 Volt	1350 Pkt	20 Pkt	84 Pcnt
1790639475	15 Volt	1330 Pkt	20 Pkt	83 Pcnt
1790638583	15 Volt	1300 Pkt	20 Pkt	83 Pcnt
1790637673	15 Volt	1310 Pkt	20 Pkt	81 Pcnt
1790636772	15 Volt	1370 Pkt	20 Pkt	81 Pcnt
1790635871	15 Volt	1390 Pkt	30 Pkt	82 Pcnt
1790634970	15 Volt	1430 Pkt	30 Pkt	83 Pcnt
1790634071	15 Volt	1440 Pkt	20 Pkt	84 Pcnt
1790632271	15 Volt	1370 Pkt	30 Pkt	84 Pcnt
1790631367	15 Volt	1390 Pkt	40 Pkt	84 Pcnt
1790630470	15.08 Volt	1400 Pkt	50 Pkt	82 Pcnt
1790629566	15 Volt	1420 Pkt	40 Pkt	83 Pcnt
1790628664	15 Volt	1430 Pkt	40 Pkt	83 Pcnt
1790627763	14.93 Volt	1400 Pkt	50 Pkt	81 Pcnt
1790626863	15 Volt	1370 Pkt	60 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)