This is the latest recevied telemetry packets stored in our database for station/object HS3NOQ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1732203213 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 0 % |
| 1732202301 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 % |
| 1732201390 | 0 Pkt | 7 Pkt | 0 Pkt | -58 dBm | 0 % |
| 1732200477 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 % |
| 1732199566 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 % |
| 1732198654 | 0 Pkt | 0 Pkt | 1 Pkt | -60 dBm | 0 % |
| 1732197742 | 4 Pkt | 6 Pkt | 2 Pkt | -57 dBm | 0 % |
| 1732196830 | 0 Pkt | 0 Pkt | 1 Pkt | -58 dBm | 0 % |
| 1732195917 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 % |
| 1732195006 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1732194094 | 5 Pkt | 5 Pkt | 3 Pkt | -59 dBm | 0 % |
| 1732193181 | 1 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1732192269 | 1 Pkt | 0 Pkt | 3 Pkt | -57 dBm | 0 % |
| 1732191357 | 0 Pkt | 0 Pkt | 1 Pkt | -58 dBm | 0 % |
| 1732190445 | 4 Pkt | 6 Pkt | 2 Pkt | -57 dBm | 0 % |
| 1732189533 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 0 % |
| 1732188621 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1732187709 | 0 Pkt | 0 Pkt | 1 Pkt | -57 dBm | 0 % |
| 1732186797 | 5 Pkt | 6 Pkt | 0 Pkt | -58 dBm | 0 % |
| 1732185885 | 1 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 0 % |
| 1732184973 | 1 Pkt | 0 Pkt | 3 Pkt | -59 dBm | 0 % |
| 1732184061 | 17 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1732183149 | 31 Pkt | 6 Pkt | 2 Pkt | -58 dBm | 0 % |
| 1732182236 | 2 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 % |
| 1732181324 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)