APRS Track Direct

My position About ☰

reset

ED2ZAD-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED2ZAD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1732307304	12.23 Volt	320 Pkt	110 Pkt	64 Pcnt	16 C
1732306404	12.23 Volt	300 Pkt	110 Pkt	64 Pcnt	16 C
1732305504	12.15 Volt	310 Pkt	110 Pkt	68 Pcnt	16 C
1732304604	12.23 Volt	260 Pkt	100 Pkt	70 Pcnt	16.5 C
1732303704	12.15 Volt	210 Pkt	80 Pkt	77 Pcnt	16.5 C
1732302804	12.15 Volt	190 Pkt	80 Pkt	77 Pcnt	17 C
1732301904	12.15 Volt	180 Pkt	70 Pkt	76 Pcnt	17 C
1732301004	12.15 Volt	250 Pkt	90 Pkt	72 Pcnt	17.5 C
1732300104	12.15 Volt	350 Pkt	130 Pkt	68 Pcnt	17.5 C
1732299204	12.15 Volt	410 Pkt	150 Pkt	67 Pcnt	17.5 C
1732298304	12.15 Volt	490 Pkt	180 Pkt	68 Pcnt	17.5 C
1732297404	12.23 Volt	440 Pkt	170 Pkt	63 Pcnt	18 C
1732296504	12.23 Volt	430 Pkt	170 Pkt	66 Pcnt	18 C
1732295604	12.23 Volt	410 Pkt	180 Pkt	64 Pcnt	18 C
1732294704	12.23 Volt	380 Pkt	170 Pkt	60 Pcnt	18.5 C
1732293804	12.23 Volt	380 Pkt	170 Pkt	62 Pcnt	18.5 C
1732292904	12.23 Volt	380 Pkt	160 Pkt	60 Pcnt	18.5 C
1732292004	12.23 Volt	390 Pkt	160 Pkt	60 Pcnt	18.5 C
1732291104	12.23 Volt	420 Pkt	160 Pkt	63 Pcnt	18.5 C
1732290204	12.23 Volt	390 Pkt	160 Pkt	60 Pcnt	18 C
1732289304	12.23 Volt	380 Pkt	160 Pkt	56 Pcnt	17.5 C
1732288404	12.23 Volt	350 Pkt	150 Pkt	53 Pcnt	17 C
1732287504	12.23 Volt	370 Pkt	150 Pkt	54 Pcnt	16.5 C
1732286604	12.23 Volt	360 Pkt	140 Pkt	53 Pcnt	16.5 C
1732285705	12.23 Volt	360 Pkt	140 Pkt	53 Pcnt	16 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)