This is the latest recevied telemetry packets stored in our database for station/object DB8NR-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758208711 | 26 deg C | 46.8 % | 1025.3 hPa | 0 | 0 |
| 1758207813 | 26 deg C | 47 % | 1023.8 hPa | 0 | 0 |
| 1758206912 | 26 deg C | 46.6 % | 1026.1 hPa | 0 | 0 |
| 1758206012 | 26 deg C | 46.6 % | 1026 hPa | 0 | 0 |
| 1758205110 | 25.9 deg C | 46.8 % | 1025.1 hPa | 0 | 0 |
| 1758204213 | 25.8 deg C | 46.9 % | 1025.1 hPa | 0 | 0 |
| 1758203310 | 25.8 deg C | 46.8 % | 1022.1 hPa | 0 | 0 |
| 1758202413 | 25.7 deg C | 46.9 % | 1023.8 hPa | 0 | 0 |
| 1758201510 | 25.6 deg C | 47.1 % | 1023.8 hPa | 0 | 0 |
| 1758200610 | 25.5 deg C | 47.8 % | 1023.3 hPa | 0 | 0 |
| 1758199710 | 25.3 deg C | 48.1 % | 1024.3 hPa | 0 | 0 |
| 1758198807 | 25.2 deg C | 48.1 % | 1023.5 hPa | 0 | 0 |
| 1758197909 | 25 deg C | 48.4 % | 1023.7 hPa | 0 | 0 |
| 1758197013 | 24.9 deg C | 48.5 % | 1026 hPa | 0 | 0 |
| 1758196109 | 24.7 deg C | 49.1 % | 1023.9 hPa | 0 | 0 |
| 1758195210 | 24.5 deg C | 49.9 % | 1024.8 hPa | 0 | 0 |
| 1758194314 | 24.4 deg C | 50 % | 1026.8 hPa | 0 | 0 |
| 1758193411 | 24.2 deg C | 50.1 % | 1026.5 hPa | 0 | 0 |
| 1758192511 | 24 deg C | 50.8 % | 1024.9 hPa | 0 | 0 |
| 1758191611 | 23.9 deg C | 51.3 % | 1023.4 hPa | 0 | 0 |
| 1758190711 | 23.7 deg C | 51.6 % | 1023.8 hPa | 0 | 0 |
| 1758189812 | 23.5 deg C | 51.7 % | 1026.8 hPa | 0 | 0 |
| 1758188913 | 23.3 deg C | 52 % | 1025 hPa | 0 | 0 |
| 1758188014 | 23.2 deg C | 52.3 % | 1024.9 hPa | 0 | 0 |
| 1758187112 | 23 deg C | 53.1 % | 1025.3 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)