This is the latest recevied telemetry packets stored in our database for station/object DK9HI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758190316 | 1011.6 hPa | 23.2 C deg | 46.5 % | 1018.9 hPa | 0 C deg |
| 1758188516 | 1011.7 hPa | 23.1 C deg | 45.5 % | 1018.9 hPa | 0 C deg |
| 1758186716 | 1011.5 hPa | 23 C deg | 45.9 % | 1018.8 hPa | 0 C deg |
| 1758184916 | 1011.3 hPa | 22.9 C deg | 45.8 % | 1018.5 hPa | 0 C deg |
| 1758183116 | 1011 hPa | 22.8 C deg | 46.3 % | 1018.3 hPa | 0 C deg |
| 1758181316 | 1010.8 hPa | 22.8 C deg | 46.1 % | 1018.1 hPa | 0 C deg |
| 1758179516 | 1010.7 hPa | 22.7 C deg | 45.1 % | 1017.9 hPa | 0 C deg |
| 1758177715 | 1010.5 hPa | 22.6 C deg | 45 % | 1017.8 hPa | 0 C deg |
| 1758175916 | 1010.4 hPa | 22.6 C deg | 44.6 % | 1017.6 hPa | 0 C deg |
| 1758174115 | 1010.2 hPa | 22.5 C deg | 44.8 % | 1017.5 hPa | 0 C deg |
| 1758136314 | 1011.4 hPa | 23.1 C deg | 42.3 % | 1018.7 hPa | 0 C deg |
| 1758134513 | 1011.3 hPa | 23.1 C deg | 42.3 % | 1018.6 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)