APRS Track Direct

My position About ☰

reset

N1KSC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1KSC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753772222	14.25 Volt	1130 Pkt	130 Pkt	64 Pcnt
1753771921	14.25 Volt	1120 Pkt	130 Pkt	64 Pcnt
1753771624	14.25 Volt	1130 Pkt	120 Pkt	64 Pcnt
1753771320	14.25 Volt	1130 Pkt	120 Pkt	64 Pcnt
1753771019	14.25 Volt	1140 Pkt	120 Pkt	64 Pcnt
1753770725	14.25 Volt	1120 Pkt	120 Pkt	63 Pcnt
1753770422	13.88 Volt	1110 Pkt	120 Pkt	63 Pcnt
1753770128	14.25 Volt	1100 Pkt	120 Pkt	63 Pcnt
1753769825	14.25 Volt	1120 Pkt	120 Pkt	63 Pcnt
1753769544	14.25 Volt	1150 Pkt	120 Pkt	64 Pcnt
1753769222	14.25 Volt	1140 Pkt	110 Pkt	63 Pcnt
1753768924	14.25 Volt	1130 Pkt	100 Pkt	64 Pcnt
1753768622	14.25 Volt	1140 Pkt	100 Pkt	65 Pcnt
1753768354	14.25 Volt	1140 Pkt	100 Pkt	65 Pcnt
1753768026	14.25 Volt	1140 Pkt	100 Pkt	65 Pcnt
1753767724	14.25 Volt	1160 Pkt	100 Pkt	65 Pcnt
1753767430	14.25 Volt	1170 Pkt	100 Pkt	66 Pcnt
1753767125	14.25 Volt	1180 Pkt	110 Pkt	67 Pcnt
1753766824	14.25 Volt	1200 Pkt	110 Pkt	68 Pcnt
1753766530	14.25 Volt	1210 Pkt	110 Pkt	68 Pcnt
1753766225	14.25 Volt	1210 Pkt	100 Pkt	68 Pcnt
1753765924	14.25 Volt	1210 Pkt	110 Pkt	68 Pcnt
1753765621	14.25 Volt	1220 Pkt	110 Pkt	69 Pcnt
1753765321	14.25 Volt	1250 Pkt	120 Pkt	69 Pcnt
1753765020	14.25 Volt	1260 Pkt	120 Pkt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)